How to Make Your Android Switch Automatically to the Strongest Wi-Fi Network

Disclosure: When you purchase through links on our site, we may earn an affiliate commission.

Since Wi-Fi signals tend to have a short range, you might need to set up many routers or repeaters if you live in a multi-story home or work in a large office. Unfortunately, Android does a terrible job of handling network switching.

The biggest problem in this situation is that Android won’t cut off its connection to the initial Wi-Fi network till the signal strength has been completely lost. When this occurs, even a stronger and closer network than the one you were using will not be used by your device.

How to Make Your Android Switch Automatically to the Strongest Wi-Fi Network

This is where the need for automatic switching comes in, and in this guide, we’ve provided the instructions to help you achieve this easily. So, keep reading to find out and follow our tips and instructions carefully.

How Does Automatic Wi-Fi Switching Work?

This is all thanks to the Cloudie Development team that has developed an app called Wi-Fi Switcher to solve this issue. With this app, you can specify the weakest signal strength you’re ready to tolerate before moving on to the next recommended network.

The app first allows you to set your favorite Wi-Fi networks. You will always be connected to the fastest Wi-Fi network accessible because it accomplishes all of this without having root access and works equally well on 2.4 and 5 GHz networks.

How to Set Up Automatic Wi-Fi Switching

The following crucial steps will guide you to set up automatic Wi-Fi switching on your Android smartphone:

  • Step 1: Start by installing the Wifi Switcher app to put an end to your Android Wi-Fi problems. Since there will be other apps with the same name, double-check that it is the one created by Cloudie Development.

You must then give permission to the Wi-Fi Switcher to access your location on the first run if you are using Android Marshmallow or higher. Make sure to hit “Allow” when offered because a problem in Marshmallow prevents apps from searching for Wi-Fi networks without this permission.

  • Step 2: Setting preferred networks is the next step. If Wi-Fi Switcher doesn’t display a list of all the neighboring Wi-Fi networks after you navigate to the main screen, just pull downwards to refresh.

Simply navigate through the list from here, locate every network you want to connect to (you might need to move around your home or workplace a little if you’re out of range for this portion), and check the boxes beside the “Preferred” choice. Your device will now only be able to connect to the “Preferred” networks thanks to Wi-Fi Switcher.

  • Step 3: The only thing left to do after creating a set of preferred networks is to select a signal intensity threshold, or “Switch Range.” Consider this to be the maximum distance at which your device will move from one favored router or repeater before connecting to the next-strongest one.

In order to access the “Settings” menu, tap the three dots in the upper right corner of the screen. From here, you can specify a signal strength threshold using the slider beside the Switch Range entry. You will be pushed off the waning network and onto a stronger one earlier if you set this value anywhere above zero (Android’s default switch).

You could set this to between one and two bars, but you may need to experiment to find the setting that works best for your specific configuration.

Additionally, you can turn on the “Ask Before Switching” setting to receive a notification when your phone detects a different network with the choice to switch or not, however doing so will stop the automatic switching. Additionally, if the names of your routers are truncated in the list of networks because they have extremely long names, the “Show Full SSID” option should be useful.

As long as you’ve secured the Wi-Fi password for each network in Android’s Settings menu, your phone or tablet will only connect from this point forward to your group of preferred networks. This prevents your device from having to constantly connect to a nearby wireless network that hardly ever has a strong signal.

The best part of this, however, is that Wi-fi Switcher will begin searching for a stronger network as soon as the signal strength of the current one falls below the cutoff you set in Step 3 when you first activate it. Your device should then automatically switch to the best network when that occurs, which is a vast improvement over the annoying default behavior of Android smartphones.

In summary, simply ensure to follow all the instructions we’ve provided in this guide to ensure that you keep enjoying the strongest Wi-Fi signal when using your Android smartphone.

Related Post

One thought on “How to Make Your Android Switch Automatically to the Strongest Wi-Fi Network”

Leave a Reply

Your email address will not be published. Required fields are marked *

Home | About Us | Contact Us | Privacy
Copyright © 2014 – 2024 MobilityArena. All rights reserved.